![]() Select the Source from which you want to retrieve a hex file to flash. If it is still not recognised, you may need to run the ImpulseRC Driver Fixer tool If it is not recognized automatically, the SCAN button can be pressed to search for a connected dfu device. The NO DFU DETECTED warning message will disappear when the flight controller is recognized to be in DFU mode. To flash the QUICKSILVER firmware, the flight controller must be in DFU mode (bootloader mode) this can be done by holding the boot button while plugging in the flight controller, otherwise you can use the RESET TO BOOTLOADER button on the GUI. There will also be a small prompt window launched in the background, do not close this! Click on the FLASH button to go to the firmware flash page.Ĭonnect a compatible flight controller via usb cable. This will open a new browser tab with the configurator app. Open the "quic-config" app (on Windows you may get a warning asking you whether you want to trust an unsigned app, click yes). quic-config-windows-amd64.zip for Windows.The configurator can be downloaded here:ĭownload and unzip the version which matches your operating system. QS_Configurator is a browser-based application that allows you to flash, and configure NFE_QUICKSILVER on your quad through the USB port.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |